The horn will sound once and the TPMS (Tyre Pressure Monitoring System) indicator flashes when the learning mode has been successfully activated. If present, the Driver information system shows “TRAIN LEFT FRONT (LF) TYRE” Read all sensors; To set pressure threshold: Inflate tyres to correct pressure; Turn ignition ON Grab a quality charger like this one to fix this issue-http://www.amazon.com/gp/product/B00HFEJM62/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASI 2015-2019 Ford Transit TPMS Light Low Tire Pressure Reset (No Tool) – When presented in May 2014. the seventh generation of the Ford Transit is again breaking new ground. Ford offered its predecessor the novelty optionally to have the front or rear-drive, to cover the different weight classes and usage needs, two models are now offered in the To reset this warning light You will need to go to the settings menu, then go to vehicle, then You can go to mobility kit. Select that and preSSReset and it will ask You for a date to enter. You should enter the date that the can expires to remind You to get a new one. Like. (18) If your 2018 Ford Expedition uses a direct system, resetting the tire pressure sensors may be as simple as pushing a reset button on the dash or following a menu as indicated in your owner's manual. If your 2018 Ford Expedition uses an indirect system, the system must be reset using a magnet or scanning tool by either a dealer or one you have This is the tyre pressure indicator. It shows that one of the tyres is losing pressure through a calve leak or puncture, or can also be triggered after you get new tyres or rotate the tyres. The method to re-set the tyre pressure warning light is as follows: Turn the ignition to position 2 (ignition on but motor not started). Switch on the ignition without starting the engine. If your vehicle has an ignition button, press the START-STOP ENGINE button without touching the brake pedal. Look for the TPMS SET button and then press it until you hear a chimes. The button is located in the glove box. Turn the ignition to the ON position without starting the engine. Turn the hazard flashers ON then OFF 6 times within 5 seconds. If the reset mode has been entered successfully, the horn will sound once. Decrease tire pressure for 10 seconds, starting from the driver’s side front tire (LF) until horn sounds. In this video I will be showing you step by step how to reset the TPMS indicator to this carVist our Youtube channel : Prius Tire Pressure Warning - Tire Sealants Emergency tire sealants in a can like Fix-A -Flat, or Slime may cause your TPWS sensor to malfunction. This does not mean that the sensor is now destroyed. RbGYxF.